CFQSD - RAPID SET EPOXY ADHESIVE PART B
- MSDS: CFQSD
- Manufacturer: MORTON INTERNATIONAL
- Product Name: RAPID SET EPOXY ADHESIVE PART B
- National Stock Number: 8040-00N080552
Product Identification
Product ID:RAPID SET EPOXY ADHESIVE PART B
MSDS Date:01/15/1992
FSC:8040
NIIN:00N080552
MSDS Number: CFQSD
Responsible Party
LOS ANGELES, CA 90033
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-225-4154
Cage: 7D283
Contractor
Telephone: 213-225-4154
Cage: 7D283
Ingredients
PROPRIETARY INGREDIENT
OSHA PEL N/K
ACGIH TLV: N/K
PHENOL, 2,4,6-TRIS(DIMETHYLAMINO METHYL); (ACCELERATOR DY
CAS: 90-72-2
RTECS: SN3500000
OSHA PEL N/K
ACGIH TLV: N/K
THIOL TERMINATED POLYMER, POLYDITHIOETER; (SILICONE
CAS: 68611-50-7
OSHA PEL N/K
ACGIH TLV: N/K
SILICON DIOXIDE (AMORPHOUS)
CAS: 67762-90-7
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (SILICA,
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL N/K
ACGIH TLV: N/K
FACILITY, OR (3) TREAT AT AN ACCEPTABLE WASTE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: REPEATED OR PROLONGED
LIQUID CONTACT MAY CAUSE IRRITATION WITH DISCOMFORT AND DERMATITIS.
MAY ALSO CAUSE ALLERGIC SKIN REACTIONS. INHAL: MAY CAUSE NOSE AND
THROAT IRRITATION. MAY CAUSE NE RVOUS SYSTEM DEPRESSION
CHARACTERIZED BY THE FOLLOWING PROGRESSIVE STEPS: HEADACHE,
DIZZINESS, NAUSEA, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: STAGGERING GAIT, CONFUSION,
UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR MIN OF 15 MINS, SEEK ASSISTANCE FROM MD .
SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . NOTE TO PHYS:
TREATMENT SHOULD BE DIRECTED AT PREVENTING ABSORPTION,
ADMINISTERING TO THE SYMPTOMS AS THEY OCCUR, & PROVIDING SUPPORTIVE
THERAPY.
Fire Fighting
Flash Point Method:SCC
Flash Point:315F,157C
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:STOP DISCHARGE, IF IT CAN BE PERFORMED SAFELY,
& CONTAIN MATL. IF SUBSTANTIAL QTY IS SPILLED, RECOVER
W/PUMP/VACUUM TRUCK. EXPLOSION PROOF EQUIP SHOULD BE USED IF THIS
PROD IS FLAMM/COMBUST. OTHERWISE , USE SYNTHETIC ABSORB. PLACE
CONTAMD (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. DO NOT CUT, GRIND, WELD, OR DRILL NEAR THIS CONTAINER.
Other Precautions:THIS CNTNR CAN BE HAZ WHEN EMPTY, BECAUSE IT CAN
RETAIN PROD RESIDUE, THEREFORE, DO NOT REUSE CNTNR FOR FOOD,
CLTHG/PRODS FOR HUMAN/ANIMAL CONSUMPTION/WHERE SKIN CONT MAY OCCUR.
ALWAYS OBEY HAZ WARNIN GS & HNDL CNTNRS AS IF THEY WERE FULL.
Exposure Controls
Respiratory Protection:WHEN ESTABLISHED AIRBORNE EXPOS LIMITES ARE
SURPASSED, WEAR NIOSH APPVD EQUIP, DETERM APPROP TYPE EQUIP FOR
SPECIFIC APPLIC BY CONSULTING RESP MFR. OBSERVE RESP USE
LIMITATIONS SPECIFIED BY NIOSH OR M FR.
Ventilation:LOCAL EXHAUST TO MAINTAIN VAPOR CONCENTRATION BELOW
THRESHOLD LIMIT VALUE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:REMOVE AND WASH CONTAMD CLOTHING BEFORE REUSE,
DISCARD SHOES IF SATURATED.
Supplemental Safety and Health
USERS OF "L" VERSION OF HMIS SHOULD CONSULT WITH "LR" VERSION FOR ADDNL
INFO . SPILL PROC:MATL IN SUITABLE CNTNR FOR DISP. APPROP SFTY
MEASURES & PROT EQUIP SHOULD BE USED. DO NOT FLUSH TO SEWER ,
STREAM/OTHER BODIES OF WATER. COMPLY W/ALL APPLIC GOVT REGS ON
SPILL RPTG. WASTE DISP METH:@ AUTHORIZED (ING 6)
Chemical Properties
Vapor Density:HVR/AIR
Spec Gravity:1.49
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:OPAQUE LIQUID WITH AROMATIC SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:NOT APPLICABLE.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE I/A/W LOCAL, STATE, & FED REGS.
OF METHS OF DISP CURRENTLY AVAIL, IT IS REC THAT ALTERNATIVE BE
SELECTED ACCORDING TO FOLLOWING ORDER OF PREFERENCE BASED UPON
ENVIR ACCEPTABILITY: (1) RECYCLE/REWORK @ ALL FEASIBLE, (2) INCIN
(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.